86505 AT A GLANCE MULTI DISPLAY pH/mV OR COND. OR TDS OR SALT WITH TEMP. & REAL TIME STAMPED ! AUTO OR MANUAL RANGE FOR CONDUCTIVITY, TDS AND SALINITY MEASUREMENT ! COLLECT DATA VIA RS232 BY LINKING WITH A PC ! AUTOMATIC BUFFER RECOGNITION TO AVOID ERRORS DURING CALIBRATION ! MAXIMUM 5 POINTS CALIBRATION (pH, COND, TDS, SALT) !CALIBRATION UP TO 2 POINTS(ONE POINT PER RANGE)HOLD RECORD ! FEATURE Max/Min review the memorized data. Reliable and replaceable probes with Temp. Compensation! Convenient to view calibration info of probe ! Ready indicator show on LCD selectable ! Stores up to 99 memories stamped w/real time Automatic or manual Temp. Compensation ! mV analog output for connecting to strip chart recorders.. pH slop/offset display and stop/offset alarm Electrode holder :Model 865H No tool needed! Just put the holder base under the benchtop meter! Max. up/down swing angle: 70 degree Max. height of the holder: 378mm SPECIFICATION Conductivity range : 0~19.99, 0~199.9, 0~1999 uS/cm 0~19.99mS/cm, 0~199.9mS/cm   Conductivity accuracy : ±(1% F.S.+1digit ) Under good calibration   Conductivity resolution : 0.01uS / 0.1uS / 1uS/0.01mS / 0.1mS   Conductivity cell constant : 1.0 mV range : -1999~+1999mV.   mV accuracy : ±0.2mV( ±199.9mV ) or ±2 mV ( other range )   mV resolution : 0.1mV( ±199.9mV ) or 1mV ( other range) pH range : 0.00~14.00   pH resolution : 0.01pH.   pH accuracy : ±0.02pH. TDS range: (f:TDS conversion factor) 0.00~(19.99*f)ppm, 0.0~(199.9*f)ppm, 0~(1999*f)ppm , 0.00~(19.99*f)ppt, 0.1~(199.9*f)ppt   TDS accuracy : ±(1% FS+1 digit)   TDS resolution : 0.01/0.1/1ppm,0.01/0.1ppt Salinity range : 0~11.38ppt , 0~80.0ppt(Based on NaCl)   Salt accuracy : ±(1% FS+1 digit)   Salt resolution : 0.01ppt , 0.1ppt Temperature (TpH & Tcond) : -5~80℃(23.0~176.0℉) Temperature accuracy : ±0.5℃ (±0.9℉ ) Cond-TDS conversion factor : 0.300-1.000 Cond/Temperature coefficient: 0.0 to 10.0% per ℃ Normalization Temperature: 15.0 to 30.0℃(adjustable) Power requirement : Adaptor, 9 VDC <10mA Operating Temperature : 5~40℃(41~104℉) Operating RH : Up to 95% without condensation Storage Temperature : -20~60℃(-4~104.0℉) Storage RH :   Up to 95% without condensation Memo drawer where the operation manual is placed Dimension : 217 x 168 x 58 mm (LxWxT) Weight : 137g (meter only) Connector : 6 pin connector Standard packing and accessories :   (Hard paper box) Operation manual, 100-240VAC adaptor, RS232 cable+software, pH electrodes and electrode arm 865H. Replacement accessories : Cond. electrode:AZ830P-Graphite or AZ831P Platinum pH electrode : AZ86P2-Epoxy-body without ATC. pH electrode : AZ86P3-Epoxy-body with ATC. ORP electrode:AZ850P-Pt. needle type(Economic) ORP electrode:AZ86P5-Pt. band type (High performance) Related products : Model : 86555 benchtop printer     © Copyright 2000 AZ Instrument Corp. Last update on:03/20/2009.